Product Manual CANcockpit
TU00-0726-5111102
Technische Änderungen vorbehalten
0609
Technical details subject to change
5.2 - 29
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
CANopen-Specification for CANcockpit
Error Mode Output 8-Bit (6206h)
This object indicates, whether an output is set to a pre-defined error value (see 6207
h
object) in case of a message time out.
1 = output value shall take the pre-defined condition specified in 6207
h
object
0 = output value shall be kept if an error occurs
Actual values can be configured with WINgauge (EEPROM parameters).
OBJECT DESCRIPTION
Index 6206h
Name
Error Mode Output 8-Bit
Object Code
Array
Data Type
UNSIGNED8
Category Optional
ENTRY DESCRIPTION
Sub-Index 0
Description
Number of Outputs 8-Bit
Access ro
Entry Category
Mandatory
PDO Mapping
No
Value 8
Default Value
8
Sub-Index 1
Description
Error Mode Output 1 to 8
Access Ro
Entry Category
Mandatory
PDO Mapping
No
Value Range
Unsigned8
Default Value
No
Sub-Index 2
Description
Error Mode Output 9 to 16
Access Ro
Entry Category
Optional
PDO Mapping
No
Value Range
Unsigned8
Default Value
No
Sub-Index 3
Description
Error Mode Output 17 to 24
Access Ro
Entry Category
Optional
PDO Mapping
No
Value Range
Unsigned8
Default Value
No
Sub-Index 4
Description
Error Mode Output 25 to 32
Access Ro
Entry Category
Optional
PDO Mapping
No
Value Range
Unsigned8
Default Value
No
Sub-Index 5
Description
Error Mode Output 33 to 40
Access Ro
Entry Category
Optional
PDO Mapping
No
Value Range
Unsigned8
Default Value
No
Summary of Contents for CANcockpit Series
