2.5.3
Display Functions
2.5.3.1Main Display (Odometer, Hourmeter)
The display shows total and trip in two lines. Total has 6 digits and trip has
4 plus 1 digit. The figures roll over to 0.0 after a distance of 999.999 /
9.999 or 100.000 / 1.000 hours. Pressing the button longer than 2 seconds
will reset trip odometer or hourmeter.
A part of the Display can be used to show the company logo as a start-up
display configured by WINgauge
The centre of the display shows the value of the odometer in the first line
and the tripmeter underneath. The physical unit is displayed right to it and
can be either miles or km.
The main display of the tachometer is similar to the speedometer, except
that it shows operating hours instead of odometer and trip meter.
The physical unit is "h" for hours. The digit after the decimal point of the
trip hourmeter shows 1/10h.
if no CAN signal is received, only dashes will be indicated.
2.5.3.2Alarm Display
If an alarm is triggered the Alarm Display is shown. To alert the user, the
General- Alarm-Symbol is flashing, alternating with the symbol that indica-
tes the type of alarm.
The Central area of the display shows the actual physical value (6digits).
The physical unit appears to the right.
When the customer quits the alarm longer two seconds the Display will
change to the last displayed value (if no other Alarm and Warning is exi-
sting which weren't quitted). The General Alarm Symbol will remain in the
graphic Symbol Area with a vertical line on the right side of the symbol to
indicate that the Alarm doesn't correspond to the main display but to anot-
her Physical Value.
When different Alarms are present the highest priority will be shown. The
priority of the alarms is defined with the WINgauge Software. If the Alarm
is confirmed and the Alarm condition does not exist anymore then the
Alarm is cleared in the list of active Alarms. If the Alarm is not confirmed
but the Alarm conditon does not exist anymore then the Alarm is still in the
list of active Alarms.
To see the different Alarms in the Alarm display group the button has to be
pressed shortly (>50 msec).
2. Functional Specification
Product Manual
Main Display for Tachometer
Physikal
Unit
6 Digit Hourmeter
+ Triphourmeter
Main Display for Speedometer
Physikal
Unit
6 Digit Odometer
+ Tripmeter
Alarm Display
Alternating
ISO Symbol
6 Digit
Label
6 Digit Value
Configuration Option:
•
To provide additional information two
Centre Lines can be programmed. The
top line displays a label for identification.
•
If no physical value should appear on the
display, then a configuration allows a di-
splay, which only shows the alternating
graphic symbol in the centre of the di-
splay.
This option is useful, if a digital input triggers
an alarm.
Technische Änderungen vorbehalten Technical details subject to change
2 - 14
TU00-0726-0000002
0609
Physikal
Unit
Summary of Contents for CANcockpit Series
