Product Manual CANcockpit
TU00-0726-5111102
Technische Änderungen vorbehalten
0609
Technical details subject to change
5.2 - 14
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
CANopen-Specification for CANcockpit
ENTRY DESCRIPTION
Sub-Index 0h
Description
Number of entries
Entry Category
Mandatory
Access ro
PDO Mapping
No
Value 4
Default Value
4
Sub-Index 1h
Description Vendor
ID
Entry Category
Mandatory
Access ro
PDO Mapping
No
Value Range
UNSIGNED32 (Actual value 0x09000053)
Default Value
No
Sub-Index 2h
Description Product
code
Entry Category
Optional
Access ro
PDO Mapping
No
Value Range
UNSIGNED32 (Actual value TBA.)
Default Value
No
Sub-Index 3h
Description Revision
number
Entry Category
Optional
Access ro
PDO Mapping
No
Value Range
UNSIGNED32 (Actual value see above)
Default Value
No
Sub-Index 4h
Description Serial
number
Entry Category
Optional
Access ro
PDO Mapping
No
Value Range
UNSIGNED32 (Actual value:
Low word = Series Number
High word = Production Week, Year
as stored in EEPORM)
Default Value
0xFFFF0000
Receive PDO communication parameters (1400h to 1406h)
These RPDO receive asynchronously the values of maximum 32 digital outputs plus the analogue outputs (gauge
indications). The transmission type is 254. The sub-index 0h contains the number of valid entries within the communication
record. Its value is set to 2. All parameters are "read only".
OBJECT DESCRIPTION
Index
1400h to 1406h
Name
Receive PDO parameter
Object Code
RECORD
Data Type
PDO CommPar
Category
Mandatory for each supported PDO
Summary of Contents for CANcockpit Series
