![background image](http://html.mh-extra.com/html/vdo/cancockpit-series/cancockpit-series_product-manual_858176016.webp)
2.2 Mechanical Concept
As the same LCD is used for different Master gauge diameters the pointer position has different eccentricities and indication
angles.
The connectors are 26-Pin MODU II-Connector and 4-Pin MATE-N-LOK from AMP.
2.2.1
Master dia. 80 mm
Two PCB's are necessary for this diameter. They are connected with a standard pin connector
and two distance towers.
2.2.2
Master dia. 85 mm
The PCB assemblies and their corresponding parts of the Ø 80 mm and Ø 85 mm gauges are identical. The difference bet-
ween the two gauges is the position of the stepper motor on the PCB so that the eccentricity of 7 mm in the Ø 80 mm gauge
can be reduced to 4.5 mm in the Ø 85 mm gauge.
2.2.3
Master dia. 100 mm
For this size, only one PCB assembly is necessary. Input Signal Processing.
Gauge diameter [mm]
Eccentricity [mm]
Indication angle
80
7
210°
85
4.5
216°
100
0
206°
2. Functional Specification
Product Manual
Technische Änderungen vorbehalten Technical details subject to change
2 - 6
TU00-0726-0000002
0609
Summary of Contents for CANcockpit Series
