Product Manual CANcockpit
TU00-0726-5111102
Technische Änderungen vorbehalten
0609
Technical details subject to change
5.2 - 20
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without express
authorization is prohibited. Offenders will be held liable for the payment of damages. All right reserved in the event of the grant of a patent,
utility model or design
.
CANopen-Specification for CANcockpit
ENTRY DESCRIPTION
Access wo
PDO Mapping
No
Value Range
20h to 7Fh
Default Value
"
"
Write Alarm or (but not and) Warning Display 4x16 (2003h)
This visible string object provides the text to be displayed on the CANopen Alarm or Warning Display (only one of the two). It
has a length of 64bytes. The character set is the small font (6x8pixel) CANcockpit character set as specified in the EEPROM
specification. This object should not be written to, if the 2lines x 8character format is selected.
OBJECT DESCRIPTION
Index 2003h
Name
Write Alarm or Warning display data
Object Code
VAR
Data Type
VISIBLE_STRING
Category Optional
ENTRY DESCRIPTION
Access wo
PDO Mapping
No
Value Range
20h to 7Fh
Default Value
"
"
Trigger Hardware Reset (2004h)
This variable allows triggering a complete hardware reset of the CANcockpit system. The function can be activated after a
new configuration has been written to EEPROM, so that it will not be necessary to disconnect power from CANcockpit to
activate the new settings.
Caution: This reset does not only affect the CANopen interface of CANcockpit. When this function is activated CANcockpit
enters a loop and stops serving the watchdog. This will trigger a watchdog reset after a short delay.
To prevent accidental activation of this function, it will only operate, if the special security code will be written to this object in
pre-operational state. All other data will be ignored.
OBJECT DESCRIPTION
Index 2004h
Name
Trigger Hardware Reset
Object Code
VAR
Data Type
UNSIGNED32
Category Optional
ENTRY DESCRIPTION
Access wo
PDO Mapping
No
Value Range
0xCE560A1F
Default Value
No
Summary of Contents for CANcockpit Series
