Page 36
User Manual
3D Settings Description
3D Scan Setting
Description
Hole Filling
3D scanning software automatically fills any
regions in the scan or “holes” where data is
missing. Holes are filled when the user stops
scanning and the model is displayed on the
screen.
Hole Highlighting While Scanning
Highlights those areas where holes are located
during the scan. This enables the user to see
where holes are and complete them.
3D Projection
Select either Perspective or Parallel default view
of scanned arches
Enable Colored ROI Overlay During
Bite Alignment
Select to display colored ROI overlay during Bite
Alignment. Activated by default. This triggers a
green/red overlay during scan phase to indicate
actively gathering data.
Enable High
-
Resolution Finalization
Select to enable default high-resolution
finalization
