Varian 990 dCLD II, Operation Manual

Page: 87 / 162

Model 990 dCLD II Component Leak Detector
4-13
4.6 Main Menu Selection Screen
Touch the MENUS box on the Home screen to display the Main Menu screen (Figure 4-9).
The Main Menu screen displays the screens available for performing general setup of the
990 dCLD II. Touching the
BACK box from this screen displays the Home screen. The
screens available through the Main Menu screen are described in this section. Many menus
contain toggle boxes that switch between selections each time you touch them. The value
or selection that is displayed when you touch
OK , is what is set. Other menus contain
parameters. Change their values by following the procedure in Section 4.2.2 “Changing
Variables in Touch Panel Screens” on page 4-5.
Figure 4-9 Main Menu Selection Screen
4.6.1 Calibrated Leak Set-Up
Touch the SET-UP CAL LEAK box to display the Calibrated Leak Set-Up screen, shown in
Figure 4-10. It is used to set the values of the Internal and External Calibrated leaks, to select
whether to use an INTERNAL or EXTERNAL calibrated leak standard for calibration, and to
select NORMAL or FAST CALIBRATION mode.
Figure 4-10 Calibrated Leak Set-Up Screen
BACK
LEAK RATE
OUTPUT
CAL
LEAK
SET-UP
REJECT &
AUDIO SET
POINTS
UNITS
SET-UP
RANGING
SET-UP
CONTROL
SET-UP
TO
ZEROING
SCREEN
SERVICE
MENU
BACK
LEAK RATE
OUTPUT
CAL
LEAK
SET-UP
REJECT &
AUDIO SET
POINTS
UNITS
SET-UP
RANGING
SET-UP
CONTROL
SET-UP
TO
ZEROING
SCREEN
SERVICE
MENU
BACK
INTERNAL LEAK VALUE: X.XE-XX
EXTERNAL LEAK VALUE: X.XE-XX
USE
INT
LEAK
USE
NORM
CAL
OK
DN
UP
NXT
CALIBRATED LEAK SET-UP
ESC