V-301Series Operating Instructions 3.02E
29
H
L
1
Push down the table so that the pressure
adjusting screw can be seen from the adjusting
hole on the frame cover.
2
Adjust the sealing pressure by turning the
adjusting screw with a Phillips screwdriver.
3
Turn the screw counter-clockwise (towards
“H”) to increase the sealing pressure.
4
Turn the screw clockwise (towards “L”) to
decrease the sealing pressure.
Sealing pressure necessary for sealing varies according to material or thickness of the bag (film), therefore adjust
pressure corresponding to the bag (film) used if sealing becomes messy.
11 Adjust sealing pressure
Press down the table completely.
Turn clockwise ( L )
to decrease pressure.
Turn counter-
clockwise ( H ) to
increase pressure.
Warning
It is very dangerous to adjust the sealing
pressure with the power on, as the micro-
switch may inadvertently be activated.
Please unplug the power cord before
performing this operation
Caution
Excessively tightening or loosening the
adjustment screw may damage certain
parts or cause them to come apart.
Please use caution when adjusting the
screw.
