V-301Series Operating Instructions 3.02E
12
POWER
POWER
HEAT CY
CLE
HEAT CY
CLE
VAC CY
CLE
VAC CY
CLE
HEAT T
IMER
HEAT T
IMER
VAC TIM
ER
VAC TIM
ER
VACUUM
START
VACUUM
START
NOZZLE
IN/OUT
NOZZLE
IN/OUT
POWER
POWER
HEAT CYCLE
HEAT CYCLE
VAC CYCLE
VAC CYCLE
HEAT TIMER
HEAT TIMER
VAC TIMER
VAC TIMER
VACUUM START
VACUUM START
NOZZLE IN /OUT
NOZZLE IN /OUT
7 Major parts and functions
V-301
Control Panel
Power lamp
Vacuum lamp
Heating lamp
Vacuum start button
Vacuum timer dial
Heating timer dial
Sponge pad
Frame cover fixing screw
Fluoro glass sheet holder fastening screw
Parts cover
Nozzle
Table
Pressure plate
Frame cover
Power switch
Electrode
Fluoro glass sheet holder
Turns ON when the power is ON.
Turns ON during the vacuum
cycle.
Turns ON during the heating
cycle.
Push to start vacuuming (or supplying) air.
Adjust the heat timer according to the bag
thickness and material.
(0.1 ~ 2.3 seconds)
Adjust the vacuum timer according to the bag
size and packaging content.
(Dial 1~9= about 0.1~20 seconds, or manual
[=continuous] mode)
Works as a packing when removing/
supplying air from the nozzle.
Loosen these screws on both sides 2
to 3 turns to remove the frame cover.
Loosen these screws 2 to 3 turns to
remove the fluoro glass sheet.
Accessories stored inside
this cover.
Removes/supplies air inside the
pouch through this nozzle.
Push the table down to seal.
The position to push the table is
indecated on the label adhered to
the table. Do NOT push the edge
of the table.
Remove this holder when
replacing/shifting the fluoro
glass sheet or replacing the
heating element.
Remove terminal covers
when replacing the heating
element.
Push to turn ON and OFF
the power.
Nozzle IN/OUT button
When the lever is open, the nozzle
moves back and forth by pressing
this button.
Control panel
