V-301Series Operating Instructions 3.02E
28
When removing the vacuum / flushing air lines, pull the
hose while pushing on the release ring around the elbow
joint.
This is unnecessary when plugging in the hoses.
The check-valve-action of the collect will prevent the
hoses from slipping out.
The leak-proof seal is thanks to a V-seal of joint.
10-8 How to remove piping (hose)
Screw
section
Hose
Note how far the hose must be
plugged in
19~
21mm
Collet
V-seal
O-ring
Release ring
-RLQWIUDPH
Pullout the hose while
pushing this.
Caution
When the hose is only partially plugged in
(under 18mm), it may cause an air leak
and weaken the vacuum.
