V-301Series Operating Instructions 3.02E
18
1
Using a Phillips screwdriver, loosen the screw
which holds the frame cover and lift it off.
2
Remove the IN hose from the air filter elbow
joint and set it so that it sticks out of the
machine frame.
3
Plug the OUT hose into the air filter elbow joint
which was connected to the IN hose.
The air becomes provided into a pouch.
V-301 series sealer does not only remove the air, but can flush it as well.
It is as simple as reversing the air hose lines on the vacuum pump.
The procedure for changing the hose connections is detailed below.
9 When air flushing is desired
Elbow joint
OUT hose
Filter
To nozzle
Remove IN hose
IN hose
Place outside the frame cover
Insert the OUT hose
Elbow joint
To nozzle
Warning
Always unplug before replacement of
the parts.
There is a danger of electrocution if the
plug is still inserted.
