V-301Series Operating Instructions 3.02E
15
H
L
POWER
POWER
HEAT C
YCLE
HEAT C
YCLE
VAC CY
CLE
VAC CY
CLE
HEAT T
IMER
HEAT T
IMER
VAC TIM
ER
VAC TIM
ER
VACUUM
START
VACUUM
START
NOZZLE
IN/OUT
NOZZLE
IN/OUT
H
L
POWER
POWER
HEAT C
YCLE
HEAT C
YCLE
VAC CY
CLE
VAC CY
CLE
HEAT T
IMER
HEAT T
IMER
VAC TI
MER
VAC TI
MER
VACUU
M STAR
T
VACUU
M STAR
T
NOZZL
E IN / OUT
NOZZL
E IN / OUT
Push the"Nozzle IN/OUT button" to move the nozzle
forward. Nozzle will extend beyond the sealing surface.
1
Insert the nozzle inside a pouch.
When inserting the nozzle, hold the pouch with
your hands and slide the upper film with your
thumbs towards you to open the pouch.
2
Lightly pull the pouch outward with your hands
to avoid wrinkles on sealing.
3
When vacuuming a solid item, put the item
close to the vacuum nozzle tip to avoid the
pouch film clogging the nozzle when
vacuuming. For the liquid or powder items,
keep some distance between the nozzle.
4
Make sure that the packaging content is placed
in the desired position inside the bag.
Push the vacuum start button to start vacuuming.
Vacuuming stops when the set vacuum timer expires,
and the nozzle returns automatically. When the manual
(continuous) mode is selected, push the nozzle IN/OUT
button to finish vacuuming.
Adjust vacuum time again when it is too short or long.
Press the table down with both hands until you hear
click sound and the upper lever is locked in position.
8-6 Move the vacuum nozzle forward
8-7 Place a pouch to the sealing area
8-9 Start vacuuming
8-8 Push the table down
Nozzle IN/OUT button
Vacuum start button
Caution
Please push the area indicated by the
sticker on the table.
If you push the other part of the table such
as its edge, the table might be damaged.
