4-20
TM-403 User’s Guide
Configure HMI Settings
D292105.7b.fm
9.
Nozzle Setup: Manual Rotation
a.
Place a part in the pick position. Press
Pick Part
to activate the Pick Head
and pick a part from the pick location.
b.
If the part needs to be rotated before it is placed in tape, press
Rotate Part.
This will rotate it +90°. If no rotation is required for part placement, skip this
step.
c.
Press the right
Arrow Key
to move to the next
Job Wizard
screen.
10.
Set Place Position
a.
Use
the
Arrow
keys to position the
Pick Head
and
Carrier Tape
so the
Nozzle
is centered over the carrier tape placement position. The
Up/Down Arrow
Step 6:
Setup HMI
PICK
HEAD
