7-16
TM-403 User’s Guide
System Alarm Messages
D292105.9b.fm
Low Cover Tape System Alarm
The
Low Cover Tape
sensor is located on the
Cover Tape Arm
. It
detects when the cover tape supply on the
Cover Tape Reel
is
below a preset minimum.
If an operator attempts to start a job when the cover tape level is
below the sensor, operation will not begin. Instead a beep will
sound and a
Low Cover Warning
message will appear on the
HMI.
The operator can either resolve the warning by loading a full reel of cover tape or ignore the
warning and push
START
again to continue with the current level of cover tape.
Note:
The
Low Cover Tape
warning will only appear once during a job. If the user ignores
the message and continues operation, the TM-402 will continue taping until the job is fin-
ished or the cover tape is empty.