7-22
TM-403 User’s Guide
System Alarm Messages
D292105.9b.fm
“The system is currently in a
halted state.”
Check the following:
- The
Emergency Stop
has been pressed. Resolve the
situation, then twist and release the.
E-Stop
button.
- The
Reset
Button has not been pressed. Press
Reset
.
- Once the condition is corrected, wait for system initial-
ization and home all motors.
“The HMI is in an error condi-
tion...”
- If an unacceptable value has been entered into a setup
field, change the value to one that fits that field’s parame-
ters.
- If this message persists, the Ethernet connection to the
PLC may have been lost. Contact V-TEK Service for sup-
port.
Error Condition
Solution
