1-4
TM-403 User’s Guide
Preparing the Work Area
D292105.4a.fm
When positioning the TM-402, choose an area that is not located below overhead gantries, walk-
ways or power lines to ensure objects or liquids cannot be dropped on the machine from over-
head.
Power Requirements
The TM-402 will also require access to a 85-110 PSI air pressure system and a 240 VAC, 50/60
Hz power supply. Locate the machine so electrical power cables can be routed away from areas
where personnel are expected to move.
Note:
It is recommended that cables be routed overhead or underground. If cables must
be routed over the floor, cover them with rubber ramps.