3-18
TM-403 User’s Guide
Taper Tab
D292105.6a.fm
The
Continuous Advance
button advances the tape through the
Taper
and onto
the take-up reel. It will continue to advance until
Continuous Advance
is pressed
a second time.
Note: Continuous Advance
is useful for creating a trailer or loading tape at the begin-
ning of a job.
2.
Pressing the right
Arrow
button opens the next
Taper Setup
screen which focuses on
Vision Setup
.
A.
The
Camera State
button toggles between
Enabled
and
Disabled
.
The
Parts Until Inspection
value is the number of pockets between the
Place
point and the
Inspection
point. Begin the count at the
Place
position at
zero
, so
the
Place
position is not included.
B.
Pressing the
Trigger
button triggers the
2D Camera
to inspect the part which is
currently at the
Inspection
point. The box to the right of the
Trigger
button will dis-
play a green
PASS
message or a red
FAIL
message.
Note:
For more detailed inspection configuration and procedures, see the
Cognex
Checker User’s Guide
which was included with the TM-402.
Pressing the right
Arrow
button opens the next
Taper Setup
screen.
Taper Screen 2
A
B
