DS1097-010
66
3.9
DEVICE
This section is used to access the configuration and control functions of the devices and services available on the HVR.
Click on “Device” (HDD) on the top of the screen to open the following subsections:
HDD
Cloud
3.9.1
DISK MANAGE
In this section, you can configure the internal HDD function.
3.9.1.1
Disk Manage
This menu allows you to check & configure the internal HDD(s). You need to format the HDD only at the first startup and if
you replace a new HDD.
Select the item to access the settings of the Hard Disk connected to the HVR.
The page listing the main parameters can be accessed using this side menu item.
When HVR is connected to a HDD, the system will automatically detect if HDD is normal or not;
If the cable connected to HDD is loosen or HDD is not working correctly, HDD status will be shown as “No Disk”, or, If
HDD need to be formatted, status will be shown as “no format”, otherwise, the HDD status will be shown as “Normal”.
•
No:
indicate HDD no pre-seted by system.
•
Type:
this indicates the disc type, possible values: RW (Read Write), RE (Redundant), RD (Read Only)
•
Disk Group:
Group with which the HDD was associated
•
Status:
It will be available only when HDD have been formatted.
•
Total Space –
Total size of the hard drive currently installed.
•
Free Space –
Total amount of free space available on the hard drive currently installed.
•
Free
Time –
Usable Rec.
space currently available in hours.
•
Edit:
this is used to configure the HDD: click to open the following pop-up:
Summary of Contents for 1097/564
Page 95: ...DS1097 010 95 Capture Settings Set the format and the path to save snapshots...
Page 150: ...DS1097 010 150...
Page 151: ...DS1097 010 151...