urmet domus 1097/564, User Manual/Instructions, Page: 50 / 152

DS1097-010 50
3.7 ALARM CONFIGURATION
This section is dedicated to the set notifications for different alarm events (Motion, PIR, IO Alarm, Intelligent Analysis, PTZ
Linkage, Exception, Alarm Schedule) used by the HVR for recording and notifying alarms. Here follow the sub-menu:
Motion
PIR
IO Alarm
Intelligent Analysis
PTZ Linkage
Exception
Alarm Schedule
3.7.1 MOTION NOTIFICATION
Select Motion in the side menu to open a page where to define the methods and actions to be taken in case of motion
alarm detection.
Here follow a short Notification description:
•
Channel: this is used to select the channel with which the motion detection function is associated.
•
Buzzer: you can set if the buzzer will sound and how long when motion is detected (Disable, 10sec, 20sec, 40sec,
60sec);
•
Alarm Out: allow to match the correct external alarm sensor number.
•
Latch time: you can set how long the external sensor alarm will last when motion is detected (10sec, 20sec, 40sec,
and 60sec);
•
Record Channel: this is used to select the channels to be recorded following the alarm detected by the HVR from the
list shown.
•
Post Recording: you can set how long alarm record will last when Motion alarm ends (10sec, 30sec, 1min, 2min,
5min).
•
Show Message: You can set show the icon on the screen when Motion alarm is detected. About icons type please
refer to section “ 3.2 - Live Interface and Pop-up Menu ”
•
Send Email : this is used to send the alarm images to the configured Email addresses (for more information, see
section “ 3.8.3 - Email ”).
•
Full screen: you can set if the video is displayed in full screen mode when Motion is detected
•
FTP Picture Upload : send the picture to FTP Server for Motion Event
•
FTP Video to Upload : send the video to FTP Server for Motion Event
•
Picture to Cloud : send the picture to Cloud Server for Motion Event
•
Video to Cloud : send the video to Cloud Server for Motion Event
•
Copy: allow you copy current channel parameters to any other channel or all channels.
•
Default: allow to restore the Default notification settings.