urmet domus 1097/564, User Manual/Instructions, Page: 54 / 152

DS1097-010 54
•
Send Email : this is used to send the alarm images to the configured email addresses (for more information, see
section “ 3.8.3 - Email ”).
•
Full screen: you can set if the video is displayed in full screen mode when Intelligent Event is detected.
•
FTP Picture Upload : send the picture to FTP Server for Intelligent Event.
•
FTP Video to Upload : send the video to FTP Server for Intelligent Event.
•
Picture to Cloud : send the picture to Cloud Server for Intelligent Event.
•
Video to Cloud : send the video to Cloud Server for Intelligent Event.
•
Copy: allow you copy current channel parameters to any other channel or all channels.
•
Default: allow to restore the Default notification settings.
3.7.2 PTZ LINKAGE
A connection may be established between a Speed Dome Camera (if present) and the Motion Detection alarm and/or the
I/O alarm sensor. The function can be used to move the Speed Dome Camera to the associated preset point when a
Motion Detection or alarm sensor is triggered.
•
Channel: This is used to select the channel to be set
•
Switch: This used to switches the PTZ linkage function on and off
•
Motion : Motion detection alarm will trigger the PTZ linkage function it is checked.
•
IO : IO Alarm detection alarm will trigger the PTZ linkage function it is checked.
•
PIR : PIR alarm will trigger the PTZ linkage function it is checked.
•
PTZ1…4: Click to associate the PTZ Dome Camera to the preset points.