DS1097-010
40
3.5.8.4
PD (Pedestrian Detection)
Pedestrian Detection function detects the moving people in a pre-defined region, and a series of actions can be taken
when the alarm is triggered.
•
Channel
: to select the channel you want to configure
•
Switch
: to enable or disable the PD function
•
Buzzer
: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the detection is
triggered
•
Level:
Small, Middle & Big. Small level is recommended to detect objects in long distance. Big level is
recommended to detect objects in short distance.
•
Scene:
Scene setting includes Indoor and Outdoor. Please choose the scene to match with the place your
camera installed.
•
Post Recording:
You can set how long after an event occurs that the HVR will continue to record.
•
Latch Time:
To configure the external alarm time when the detection is triggered.
•
Alarm Out:
If your HVR support to connect to external alarm device, you can set to emit an alarm tone.
•
Show Message:
A letter “S” will be displayed on the screen when the intelligent detection is triggered.
•
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
•
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
•
Record Channel:
to select the channel(s) you want to record when a detection is triggered.
•
Area: Click [Setup]
to draw a virtual region in the camera picture.
Summary of Contents for 1097/564
Page 95: ...DS1097 010 95 Capture Settings Set the format and the path to save snapshots...
Page 150: ...DS1097 010 150...
Page 151: ...DS1097 010 151...
