DS1097-010
35
You can set an area for motion detection PIR function by clicking the mouse
：
The PIR Alarm setup, please to view “
Section
3.7.2- PIR Notification
”
3.5.8
INTELLIGENT
The optional intelligent functions, including PID (Perimeter Intrusion Detection), LCD (Line Crossing Detection),SOD
(Stationary Object Detection), PD (Pedestrian Detection), FD (Face Detection), and CC (Cross Counting).
For further details on the use and settings of the intelligent video analysis functions, you are recommended to visit the
URMET website http://www.urmet.com for series or product codes, the availability of relevant additional material, like
DS1093-576 Addendum Intelligent Video Analysis
, and any firmware updates describing improvements to the
intelligent video analysis algorithms.
3.5.8.1
PID (Perimeter Intrusion Detection)
Perimeter Intrusion Detection function detects people, vehicle or other objects which enter and loiter in a pre-defined
virtual region, and some certain actions can be taken when the alarm is triggered.
•
Channel
: Select the channel you want to configure
•
Switch
: Enable or disable the PID function
•
Buzzer
: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the detection is
triggered
•
Sensitive
: The sensitivity level is from 1 to 4. Higher sensitivity will be easier to trigger the detection.
•
Scene
: Scene setting includes Indoor and Outdoor. Please choose the scene to match with the place your
camera installed.
•
IVA Lines
: Enable or disable the IVA Lines
•
Post Recording
: You can set how long after an event occurs that the HVR will continue to record.
Summary of Contents for 1097/564
Page 95: ...DS1097 010 95 Capture Settings Set the format and the path to save snapshots...
Page 150: ...DS1097 010 150...
Page 151: ...DS1097 010 151...