English
Warning
Connection to the electricity mains must be carried out in compliance with current regulations. The appliance must
be positioned so that the power plug is accessible (for appliances fitted with Schuko plugs).
The disconnecting device must be incorporated in the fixed wiring in accordance with the wiring rules.
We recommed the use of a safety switch for fault currents. During appliance operation, the power supply voltage
should not deviate from the nominal voltage value specified on the appliance rating plate.
Caution!
Electrical connections must be performed by technicians registered with the relevant authorities as required by law
for the country in which the appliance is installed. These technicians must, nevertheless, be aware of and apply the
regulations relating to the safety of repaired products and safety in the workplace. In light of the above information,
UNOX accepts no responsibility for any situation resulting from work carried out in an unprofessional manner, or
from the incorrect intepretation or application of regulations.
Caution!
Before connecting the oven to the electricity mains, compare the power supply data with the appliance requirements
specified on its rating plate. If the voltages and power supply phases are different, adjust and correct the phase
wiring, in accordance with the data provided on the attached leaflets.
Make sure no electricity is dispersed between the phases and earth. Make sure there is electrical continuity between
the outer casing and the electricity mains earth wire.
We recommend the use of a digital multimeter when performing these procedures.
Incorrect connection may damage the appliance.
Caution!
Make sure all electrical connections are secure before connecting the appliance to the electricity mains.
Appliance fitted with Schuko plug and cable (single phase): simply insert the plug into the relevant socket (the
socket should be suitable for use with the plug supplied
28
Electrical connections
