English
14
Steam / Humidity release inside the oven cavity: STEAM.Maxi™
Your holding cabinet is equipped with exclusive STEAM.Maxi technology for the generation of steam
inside the holding cabinet chamber. This innovative technology allows you to carry out any kind of
steam cooking, starting from a temperature of 48°C, while guaranteeing maximum accuracy in terms
of steam production temperature control. STEAM.Maxi™ introduces adjustable amounts of steam in
conjunction with various temperatures, allowing different types of cooking to take place:
•
Steaming (only steam);
•
Mixed convection-steam cooking (air+steam).
Through the ADAPTIVE.Clima technology, the holding cabinets constantly monitor all cooking
parameters, not only in terms of temperature, but also the current humidity level inside the chamber.
This ensures the most suitable cooking program is always applied, to help each user achieve perfect
results every time, regardless of the number of pans placed inside.
The ADAPTIVE.Clima function will release the amount of steam required to create the humidity
percentage set by the user.
Caution!
During the cooking process, the product inside the holding cabinet releases a certain amount of steam: it
may happen, therefore, that the appliance does not produce any steam, if the moisture released by the food
is sufficient to achieve the value requested by the user. In this case the lack of steam production is not due to
an appliance malfunction, but is the result of oven monitoring and control procedures taking place correctly.
To set the desired humidity level inside the oven cavity, proceed as follows:
• Press the
button repeatedly until the CLIMA LUX display
flashes;
• Use the
button to set the desired steam release percentage (STEAM.Maxi™).
The 10 blue LEDs indicate the humidity percentage level inside the cavity requested by the user, which
can vary from 10% to 90% for each step in the cooking cycle. If 100% is selected - and for temperatures
below 130°C - the oven will automatically activate its steam only mode.
Setting the parameters
