![background image](http://html1.mh-extra.com/html/united-states-stove/ashley-ag30fp/ashley-ag30fp_manual_4498711024.webp)
-24-
Log Set Installation Instruction Sheet
If converting to LP (propane) gas, complete the
conversion before installing the log set. Follow the
conversion instructions included with the kit. Your
components may look slightly different than the ones
shown. Ensure the brick panels are installed properly
before installing the log set.
CAUTION:
DO NOT PLACE LOGS DIRECTLY OVER BURNER PORT
HOLES. IMPROPER LOG PLACEMENT MAY AFFECT FLAME
APPEARANCE AND CAUSE EXCESSIVE SOOT TO BUILD
UPON THE LOGS AND GLASS.
1. Place the ember bed onto the floor of the fireplace. Align
the ember bed slots with the burner brackets.
2. Break up the glowing wool into small dime sized pieces
or for a finer finish use a metal wire brush. Do not cover
the two oval air channels with the glowing wool.
3. Place log (1) onto the burner. Align the flat spots on the
log with the burner grate.
1
4. Place the log (2) onto the burner. The front of the log will
rest on log (1) as shown.
1
2
5. Place log (3) onto the back of the burner. Allow it to rest
on top of log (2).
2
3
6. Place log (4) behind log (1) and rest log (4) against the
back wall.
4
1
7. Place log (5) onto the ember bed. When it is in place the
front right edge of the burner will be hidden.
5