1
Hearth & Home Technologies •
HZLIN-ADP
Instructions • 2600-972 • 5/19
HZLIN-ADP
Models: MEZZO-C, CRAVE-C, ECHELON-C
Heat-Zone
®
-Gas Adapter Installation Instructions
Leave this manual with party responsible for use
and operation.
CAUTION! Risk of Cuts, Abrasions or Flying Debris.
Wear protective gloves and safety glasses during instal-
lation. Sheet metal edges are sharp.
DANGER
HOT GLASS
WILL
CAUSE BURNS.
DO NOT TOUCH
GLASS
UNTIL COOLED.
NEVER
ALLOW CHILDREN
TO TOUCH GLASS.
A barrier designed to reduce the risk of
burns from the hot viewing glass is provided
with this appliance and shall be installed for
the protection of children and other at-risk
individuals.
CAUTION! Do not install damaged components.
If any parts are missing or damaged, contact your dealer before
starting installation.
DO NOT
install a damaged kit.
1. Locate the Heat-Zone
®
-Gas knockouts on the top of
the appliance as shown in Figure 1. Remove one of
the outer knockouts from the appliance with a tin snips
or screwdriver. Inner knockouts cannot be used for
Heat-Zone
®
-Gas
installation.
2. Remove the insulation from the hole of the knockout
that was removed. See Figure 2.
Kit Contents
Verify and remove contents from packaging before
beginning installation.
(1) Collar
(1) Damper
(1) Zip Tie, 14 inch
(4) Screws
Figure 1 Top Knockout Locations
Introduction
This adapter kit is for use with the Heat-Zone
®
-Gas Kit
and is necessary when the optional Heat-Zone
®
-Gas
®
is
installed on the MEZZO-C, CRAVE-C,or ECHELON-C
models.
HEAT-ZONE
®
-GAS KNOCKOUTS
REMOVE ONE OUTER KNOCKOUT ONLY
DO NOT REMOVE INNER KNOCKOUTS
Installation
REMOVE INSULATION PLUGS
Figure 2 Remove Insulation
