![background image](http://html1.mh-extra.com/html/united-states-stove/ashley-ag30fp/ashley-ag30fp_manual_4498711023.webp)
-23-
Your components may look slightly different than the
ones shown.
1. To insert the rear liner tilt the top towards the back of the
unit and slide into position. There is a ledge for the bottom
of the rear liner to rest on. Note: The liners will have a
tight fit.
2. Next slide the left side liner into position (bottom first).
3. Slide the right side liner into position (bottom first).
4. Place the back end of the top liner onto the top liner
bracket. Secure the top liner into place by tightening the
two (2) top liner brackets. Important: Before installing the
top liner refer to the “restrictor adjustment” section of the
owner’s manual.
5. Secure the left and right side liners into place by adjusting
and tightening the right and left liner bracket.
Liner Set Installation Instruction Sheet