Defining the split points with magnet stripes
a
split points.
All laps will be cleared when you change the split points.
ded all data from the Laptimer before changing the
Make sure, that you have downlo
This is the split stripe screen.
Press
un
ou get to the sp
til y
lit point viewing screen.
Then press
to go to the split point editing screen.
Press
until you get to the split stripe screen (shown
here). Then press
to leave the editing screen, and save
the setup. Press
again to accept all laps are cleared.
Undo Clear split points!
If you by accident clear all laps by changing the split points you can undo the action this way:
1.
Turn the Laptimer off by pressing
down for 1 second.
2.
Press and hold down
while pressing
once.
3.
When the display turns on, let go of the
and you will be in Undo mode.
4.
Use
or
to change between YES and NO.
5.
Leave the text on YES and press
to undo the action. The display will now turn off, and
you are ready to start all over again.
SPL S
IT WITH WHEEL SENSOR
Using the high precision wheel sensor, you can define up to 8 points on the track as split points.
ssibility to optimize your kart setup
nt of the track individually. You can set the splits in setup mode,
the Data Analyser or using the USB cable from the PC Analyser
This will divide the track in up to 9 segments giving you the po
and driving style for each segme
during the first lap, wireless from
program.
UNIPRO – The original Laptimer
21