BASIC SETUP
hat the basic settings match your actual setup. You enter
3.
Press SETUP again to browse through the different setup screens
ou can read about all the setup screens in the reference manual. Here we will introduce you to
e ones you need to know to get started.
e
he receiver type screen.
ro Laptimer can use all types of
choose between IR (infrared), Loop (AMB
Stripe (magnets).
Use the
Go to setup mode, and make sure t
setup mode this way:
1.
Press MODE to turn on the Laptimer
2.
Press SETUP to enter setup mode
Y
th
R ceiver type
This is t
The Unip
receivers. You can
active loop) and
and
but
choose the receiver type
connected to the Laptimer. I
se a loop receiver, you
can skip the explanation about stripe setup!
tripe setup
This is the stripe setup screen.
If the receiver type is set to Stripe (magnets) this is the next
step. It is the most important setup before you start driving
on a new track. You need to set two values. The number of
magnets from the pit to the finish line (2 in this example)
and the total number of magnets on the track (3 in this
example).
ress
tons to
f you u
S
to set the two values (see the next two screens and the example with a typical
P
track).
UNIPRO – The original Laptimer
16
