background image

PC ANALYSER 

Unipro supplies a free software program called PC Analyser. This is a common platform to analyse 
and manage data and sessions from a Laptimer and the Data Analyser. 
 

Receive data from the Laptimer 

 

 

 USB cable to the 

y okay to do while the 

La

e Laptimer is then 

ch

y to transfer 

th

 
From the Transfer menu in the PC A
Laptimer will be sent to the PC program

 

pdated and ready for further analysis.

 
The PC Analyser program offers yo
and more advanced graph for deep
 

Split time table

 

The quick overview is from this tab

e are only 

p times and split times shown. Th  best times are 

marked with green and the best ro
marked in blue. The best theoretica
calculated from the best split times
sort the table from each of the colu

 

The basic idea of the PC Analyser program is to 
receive data from the Laptimer and then view,
store, print and analyse the data on the PC. 

The use of the PC Analyser program is straight 
forward. Just connect the
Laptimer (it is perfectl

ptimer is turned on). Th
anging to PC mode and is read

e data. 

nalyser program, choose “Receive” and the data from the 

. This will only take a few seconds and all windows are

 

u

u basic table viewing of the lap and split data as in pit mode 

 analysis of setup and driving style. 

le. Her

la

e

lling lap is 

l lap is 

. It is possible to 

mn headings. 

UNIPRO – The original Laptimer 

 

 

26

 

Summary of Contents for 6002





























Reviews: