Analyse your data
You can learn a lot about your performance on the track just from viewing the data on the display
o a Data Analyser or to a PC. This will give you the possibility to print or store
ll data electronically, and to make advanced analysis of the data.
DAT
A
of the Laptimer. However if you want the full benefit of the Laptimer you should export the data
from the Laptimer t
a
A NALYSER
The n
er. It is the fastest way to
etti
out of the Laptimer, with the possibility to print the data, or view them while the
ata Analyser is easy
U ipro Data Analyser is the perfect companion for your Laptim
ng data
g
driver is on the track.
Transferring data from the Laptimer to the D
1.
Turn the Laptimer on.
2.
Press
to change to pit mode
3.
Press
again to change to PC mode
4.
Press
to enable the infrared communication
5.
Press OK on the Data Analyser to turn it on
6.
On the Analyser go the main men
u with “Transfer” as
the top point. Just move the cursor to “Transfer” and
eft is
After the data is transferred to the Data Analyser they can
be viewed, stored, printed and transferred to a PC using the
ang
con
press the arrow to the right to start transferring the
data
Now the communication is started and all the data from the
Laptimer (except the logged data) is transferred to the Data
Analyser in a few seconds. The green LED to the l
blinking when the Laptimer is receiving data and the red
LED to the right is blinking when the Laptimer is sending
data.
USB connector. It is possible to store data from at least 20
Laptimers before transferring them to a PC.
You can ch
e the
nection settings in service mode.
Read more about service mode in the reference manual.
UNIPRO – The original Laptimer
25