Defining the split points with the use of the wheel sensor
1.
Make sure that you have downloaded all data from the Laptimer. All laps will be erased
when you set new split poi
2.
Decide where on the track
nt t
art
with just two or three split points, and then set more points when you have become
familiar with analysing the
3.
Get the kart and driver ready for driving a first lap where the split points are set.
4.
Turn the Laptimer on by pressing
When you define split points for a track the first time, the easiest way is to do as follows:
nts.
you wa
o have the split points. It can be a good idea to st
data.
5.
Press and hold down
until the message “Clear Spls YES” is shown in the display.
6.
Press
to accept all laps are cleared.
split points in the Laptimer are erased and you are ready to drive out and
7.
Now all laps and
set the new split points.
8.
Every time you come to a split point, press
to set the split
driven, the Laptimer will automatic
change to running m
point. When the first lap is
ally
ode.
Eac
in
er. You can
use
ed data in d
e setup next time you come to the
sam
s to
you wi
imer for each segment of the track. If you have a
am with more than one driver you can compare each drivers split times and let the drivers learn
from each other.
h split point is measured in distance from the f ish line, and stored in the Laptim
the stor
ifferent ways to make the exact sam
e track – or to copy the exact setting
other Laptimers in the team. Using the split function
ll be able to view all the data in the Lapt
te
UNIPRO – The original Laptimer
22
