SAL products are designed in accordance with all mandatory International and Australian Standards, which require installation in accordance with AS/NZS3000
by a qualified installer and regular cleaning and maintenance of the equipment. Products are sold in accordance with the following instructions and SAL
standard terms and conditions of sale, available via www.sal.net.au.
Due to continued product and information updates, product data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee
unless expressly confirmed in writing by SAL at the time of order.The product wireframe drawings in this document are intended for illustration purposes only and may differ
from the final physical product. The installation instruction is subject to change without prior notice.
STS600BTAM
Smart Timer
Switch G3
Quick Start Guide
Version
Date
1.0
09/12/2022
1. Foreword
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ THESE GUIDE AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.
2. Product Introduction
PIXIE Smart Switch G3 is the third generation smart time delay switch, that
permits the supply of electricity to the load for a predetermined time duration
after being triggered.
2.1 Product Features
• Fits most branded switch plates
• Fits 1 to 6 gang wall plate installation
• Over temperature protection, overload protection, short circuit protection
• Automatically turns off after a predetermined time duration
• Time duration can be programmed manually and via the App. When
programming manually, only hourly timer functions can be set, the period is
from 1 hour to 24 hours. When programming via the App, the time duration
can be set from 1 minute to 24 hours
• Manual override function available
• Multiway control - When pairing multiple PIXIE multifunction control device
(e.g. SMF/BTAS) with the same smart Timer Switch, multiway timer control is
achieved
• LED indicator can be enabled and disabled in the App
• In the last 1 minute of timer mode, the LED indicator flashes quickly indicating
imminent time out
2.2 The package includes
• PIXIE Smart Timer Switch G3 * 1
• Extra key caps * 2
• Silicon spacer * 1
• Load correction capacitor * 1
• Quick Start Guide * 1
2.3 Product illustration*
3. Specifications
3.1 Basic specifications
3.2 Load rating
3.3 Load compatibility
4. Wiring and Installation
DIY
*All drawings shown are for illustration purpose only, actual product may vary due
to product enhancement.
LED indicator
Default key cap
(Interchangeable)
STS600BTAM - Standard wiring diagram
NEUTRAL
ACTIVE
Light fitting
(Load)
STS600BTAM
STS600BTAM - Optional wiring diagram
NEUTRAL
ACTIVE
Light fitting
(Load)
Optional - load correction capacitor
in parallel with the load if required
STS600BTAM
The complimentary capacitor given in the carton operates as a load
correction device to assist improving compatibility performances.
Compatible Loads
240V halogen lamp
CFL
Incandescent lamp
Yes
Yes
Yes
Yes
Yes
Low voltage halogen with electronic transformer
LED fixture
No. of switch
Resistive load
(Incandescent/High voltage
halogen lamp)
Capacitive load
(e.g. LED, CFL)
Inductive load
(e.g. exhaust
fan)
1
600W
400VA
250VA
200VA
120VA
100VA
80VA
2
500W
3
500W
4
300W
150VA
150VA
100VA
80VA
60VA
60VA
5
300W
6
200W
*Subject to the load’s electrical characteristics, the load may require the inclusion of a load correction capacitor given in the product carton
Model No.
Input (V)/(Hz)
Dimension L x W x H (mm)
Wireless
Bluetooth Mesh Technology
STS600BTAM
240/50
9*/600W
Blue
42 x 24 x 24
Colour
Min / Max loads
MASTER
