![background image](http://html1.mh-extra.com/html/tense/erd-48/erd-48_quick-start-manual_1087698001.webp)
ERD-48
DIGITAL TIMER
General Specification
1
ENG
Digital ON DELAY Timer with Out1 (Delayed) & Out2 (Instantaneous) outputs
ON DELAY with power ON or Flashing; user selectable
Displays SET or count down values
Front panel selectable time base; 99.9 seconds, 999 seconds, 99.9 minutes, 999 minutes
Front panel dimension: 48x48mm
Easy installation with plug-in connectors
Panel Hole Sizes :
:
:
:
:
:
:
:
:
:
:
:
:
Display
Function
START Input
Scale
Resolution
Accuracy
Delayed Output
Instant. Output
Supply Voltage
Power Consump.
Operating Temp.
Operating Altitude
46x46mm
1x3 Digit 7 Segment display
Instantaneous and delayed output after START ON or flashing
11 & 12 pins; 100....240VAC, 50/60Hz, max. 3mA
99.9 sec., 999 sec., 99.9 min. veya 999 min (selectable)
0.1 sec. / 1 sec. / 0.1 min. / 1 min
± %1.5 (of SET Value)
Out1; Relay (NO-O-NC), 250VAC, 2A Resistive load
Out2; Relay (NO-O), 250VAC, 2A Resistive load
100....240VAC, 50/60Hz
<
5VA
o
o
-20 C....55 C
<
2000m
Technical Specification:
Use twisted pair and shielded signal cables. Connect shield to ground from the device side. Keep all signal cables away
from circuit breakers, devices/cables emitting electrical noise and power cables.
Take precauitons against environmental conditions like humidity, vibration, pollution and high/low temperature during
installation.
Use a fuse (slow 250mA 250VAC) on supply input of the device. Use appropriate cables for supply connections. Apply safety
regulations during installation.
Warning:
!
MADE IN TURKEY