UniPOS
Wireless Fire Alarm Control Panel VIT 01
Instruction manual
Page 13
Revision 10/02.17
Pages 51
Condition of the Fire Control Panel
Indication
Fault condition
Local sounder - discontinuous signal
– slow
beeping
Table 2
Means of control
Condition of the
Control Panel
Access
Lecel
Operation
Button
“Reset”
Fire condition
Levels 2
and 3
Reset Fire condition Stage 1 or Fire
condition Stage 2, indicated on the display
Button
“Outputs”
Fire condition
Levels 2
and 3
- In presence of activated outputs for Fire
condition
– suppresses the outputs;
- In suppressed outputs for Fire condition
–
reactivates the outputs
Duty Mode
Forced outputs activation
– Evacuation (see
6.3 - Note)
Button
“Alarm”
Fire condition or Fault
condition
All
Suppressing/ activating of the local sounder
Button
“Menu”
Duty Mode, Fire
condition, Fault
condition, Test and
Disabled component
All
- Enter next menu;
- Confirm data;
- Next position.
Button
„Down”
Set Up, Fire
condition, Fault
condition, Test and
Disabled component
Levels 2
and 3
- Selects next basic screen;
- Moves the cursor through menus;
- Selects next parameter.
Button
“Up”
Set Up, Fire
condition, Fault
condition, Test and
Disabled component
Levels 2
and 3
- Selects the next screen;
- Moves the cursor through menus;
- Selects next parameter.
Button
„End”
Set Up, Fire
condition, Fault
condition, Test and
Disabled component
Levels 2
and 3
Returns to the previous screen
Button
„Inspection”
Fire condition
All
Adds additionally set inspection time for
each activated zone between phase 1 and
2.
5.3. Display and using the buttons
5.3.1.
Display
The LCD display shows three types of information:
basic screens;
menus;
entering parameters.
The basic screens display information about the system status or the condition of one of its
components, as well as event log information about past events in the system.
The menus display different options for selecting function or submenu.
The cursor is a flashing rectangle and it moves along the row of buttons
and
.
