UniPOS
Wireless Fire Alarm Control Panel VIT 01
Instruction manual
Page 25
Revision 10/02.17
Pages 51
The displayed text indication is specific for each menu, function, or screen. In section
description of operation in menu "Set Up" are given screens with text indication for each of the
adjusted parameters.
12.3. Using the keypad
„Set Up” condition is with access level 2 or 3.
The Control Panel recognizes 2 valid
passwords
– of level 2 and level 3. Upon entering
password of level 2, part of the mode functions
are not accessable for the operator.
Enter the password by following order:
By buttons
and
enter the first
digit of the password;
By means of button
proceed to the
next digit.
12.4. Using the menus
The menu has the following submenus:
Note: Menus with italic and bold type are
accessible only with password in access level 3.
All others are accessable in access level 2.
Panel (chapter 12.4.1)
Test (chapter 12.4.1.1)
Outputs (chapter 12.4.1.1.1)
Indication (chapter 12.4.1.1.2)
Clock (chapter 12.4.1.2)
Parameters (chapter 12.4.1.3)
Language (chapter 12.4.1.3.1)
Ground check (chapter 12.4.1.3.2)
Netrwork address (chapter 12.4.1.3.3)
Password access level 2 (chapter 12.4.1.3.4)
Password access level 3 (chapter 12.4.1.3.5)
Check back-
up detector’s battery (chapter 12.4.1.3.6)
Delete Archive (chapter.12.4.1.4)
Zones (chapter 12.4.2)
Devices list (chapter 12.4.2.1)
Parameters (chapter 12.4.2.2)
Name of the zone (chapter 12.4.2.2.1)
Inspection time (chapter 12.4.2.2.2)
Time Phase1-Phase2 (chapter 12.4.2.2.3)
Manual call point priority button (chapter 12.4.2.2.4)
Output devices Phase 1 (chapter 12.4.2.3)
Output devices Phase 2 (chapter 12.4.2.4)
Registration (chapter 12.4.3)
Menu permissions (chapter 12.4.3.1)
Devices (chapter 12.4.3.2)
