UniPOS
Wireless Fire Alarm Control Panel VIT 01
Instruction manual
Page 20
Revision 10/02.17
Pages 51
The zone is set to Test mode.
The display shows information about:
-
Zone number in test;
-
Zone mode;
-
Number of detectors in Fire condition;
-
Number of Disabled components;
-
Number of detectors in Fault condition.
Exit of the condition is to be performed by the
same way, as in the menu
„Start Test” is changed
with
„Stop Test”.
10.3. Using the keypad
Active buttons are:
-
buttons
and
for zone selection and inserting the digits of the password;
-
button
to enter menu test and confirmation of the inserted password;
-
button
for exit.
11. Information and control condition
11.1. Description
Information and control condition mode, through the system of main menus and submenus,
provide opportunity to have information about the Control Pane
l’s settings and control some features
of the system components.
This condition can operate in combination with the following modes of the Control:
-
Duty Mode;
-
Fire Condition;
-
Disabled component mode;
-
Test mode;
-
Fault condition mode;
-
Set Up mode.
11.2. Indication
11.2.1.
LED and sound indication
There is no specific LED or sound indication in the this condition of the panel.
11.2.2.
Text indication
The screens, showing on the display are organized in tree structure of subordinated one to the
other menus (Appendix 2).
Each screen has a specific text indication, connected to the actions, performed in it. The specific
messages are described in the relevant screens.
11.3. Using the keypad
Press button
to enter condition Information and control from the windows of Duty Mode, Fire
condition, Fault condition, Test and Disabled component, which suppresses their text messages.
When the Control Panel is in combination of Information and control and Fault condition, button
(“Alarm”) is also active.
When the Control Panel is in combination of Information and control and Fire condition, the active
buttons are
(“Alarm”) and
(“Outputs”).
