UniPOS
Wireless Fire Alarm Control Panel VIT 01
Instruction manual
Page 24
Revision 10/02.17
Pages 51
11.4.3.
Menu
“Disabled Devices List”
The menu is available at all access levels and contains information screens showing the disabled
devices in the system.
Buttons
and
display the
disabled devices in ascending order, and
button
- in descending order.
Button
returns the display into the
main window.
11.4.4.
Menu
“Set Up”
Enter
„Set Up” mode by entering a valid password. The manu contains screens for setting up
parameters of the system and check of the elements of the Fire Alarm System.
The Control Panel recognizes 2 valid
passwords
– of level 2 and level 3. Upon entering
password of level 2, part of the mode functions
are not accessable for the opertator.
Enter the password by following order:
By buttons
and
enter the first
digit of the password.
By means of button
proceed to the
next digit.
Enter the other digits by the same procedure.
The password validity is checked after entering the last digit. Upon entering a correct password
the Control Panel goes to to
„Set Up” mode.
12. Set Up condition
12.1. Description
In Set Up mode shall be performed all the functions on testing, correction of parameters,
configuration and changing elelemts of the system.
The mode consists of 3 main sections, serviced through a system of menus with a tree structure.
(Appendix 2):
set up and test of the Control Panel;
configuration and setting the basic parameters of the serviced zones;
registration, test and set up of the connected in the system elements (routers and fire
detectors).
Important: In
„Set Up” condition the Control Panel does not service fire detectors for
fire and fault, and does not activate outputs.
12.2. Indication
12.2.1
. LED and sound indication
In
„Set Up” condition is illuminated only the green LED indicator for the Control Panel’s power
supply
. The local sounder is switched off.
12.2.2.
Text indication
