Ultre 3000/4000 - User Manual
6-3
Messages - 6
■
LCD Status Messages
The following messages provide machine status and error
information and are displayed in the status field of the Machine
Status Display (see "LCD" on page 3-7):
CUT
Displayed for less than one second after depressing the Cut Button
indicating that the film is being cut. It is immediately followed by
the "FILM ADVANCE" message as the film is automatically
advanced a few inches.
FILM ADVANCE
Indicates that the film is being advanced in the machine. It is
displayed when either the Jog Button, Advance Button, or Cut
Button is depressed.
JAM
An error message indicating that the photo material has jammed in
the machine. The film will stop advancing and the current print job
will abort. Note that the error message is generated only when the
film transport is operating. No message is generated while the
machine is idle.
NO CASSETTE
Indicates that the Take-up Cassette has either been removed or
has not been properly installed on the machine.
OUT OF MEDIA
Out of Media error message indicating that the Supply Cassette has
run out of film. Note that the error message is generated only when
the film transport is operating. No message is generated while the
machine is idle.
3000/4000 UM : Chapter 6 (Messages) Page 3 Wednesday, September 4, 1996 8:28 AM
