6-4
Edition March 1995
6 - Messages
PHOTO ERROR
Photo Error message generated by the SOL sensor indicating that
the photodiode failed to detect the laser beam. Note that the error
message is generated only when the optics system is active.
POWER SUPPLY FAULT
One of more of the power supply voltage levels is incorrect.
PRINTING
Machine is printing as film is being advanced.
READY
Machine is ready to accept commands from the host system or the
control panel.
REMOVE CASSETTE
Indicates that printing is completed and that the exposed film is in
the Take-up Cassette and ready for processing.
SELF TEST
This message is displayed during self test mode.
LASER FAULT
This error indicates a fault in the laser drive.
SPINNER FAULT
This error indicates an error in the laser spinner or spinner drive.
FILTER FAULT
This error indicates an error in the laser power and filter wheel
assembly.
TRAN FAULT
This error indicates a faulty transport drive system.
3000/4000 UM : Chapter 6 (Messages) Page 4 Wednesday, September 4, 1996 8:28 AM
