2-8
Edition March 1995
2 - Introduction
■
On/Off Switch
Power is controlled by the rocker switch located on the back panel
above the power supply connector. When power is turned on, the
machine will perform a brief diagnostic self-test. It will signal that
it is ready by illuminating the green light emitting diode (LED) on
the control panel and displaying "READY" on the liquid crystal
display's (LCD) status line (LCD Display see page 3-3)
.
On/Off
Switch
Power
Connector
SCSI I/F Port
Ultre Interface
Connector
Serial I/F Port
3000/4000 UM : Chapter 2 (Intro) Page 8 Wednesday, September 4, 1996 8:28 AM
