Ultre 3000/4000 - User Manual
2-5
Introduction - 2
■
Mains Connection
The Imagesetter can be connected to mains supplies as indicated
on the unit serial number plate (nominal input 115 V or 230 V AC,
50 or 60 Hz). The unit power supply will automatically be switched
to the matching supply voltage and frequency.
To connect the unit to the mains supply, use the power cord set
provided with the unit or refer to the tables following to select a
commercially available cord as specified.
3
Switching off the Imagesetter from the rear panel does not
disconnect the unit from the mains supply. To disconnect the Ultre
3000/4000 from the mains supply, remove the power plug first.
The mains outlet must be easily accesible.
3000/4000 UM : Chapter 2 (Intro) Page 5 Wednesday, September 4, 1996 8:28 AM
