3-12
Edition March 1995
3 - Control Panel
Operate the knife by depressing the Cut Button. The LCD will dis-
play "CUT" for less than 1 second. The film will then advance
inside the machine past the upper rollers, the LCD will display
"FILM ADVANCE", and the LED will begin blinking. When the film
stops advancing, the LED will stop blinking and the LCD will read
"REMOVE CASSETTE".
The Take-up Cassette may be removed by lifting straight up. The
LCD will display "NO CASSETTE". Approximately 2 inches of film
will be protruding from the cassette as a leader for processing.
Follow the manufacturer's instructions for preparing the leader for
threading into the processor.
2
ATTENTION:
Wait until the LED has stopped blinking and the LCD
reads "REMOVE CASSETTE" before removing the Take-up
Cassette. Failure to do so may result in
exposing
the film in Take-
up Cassette.
After processing the exposed film, the copy may be evaluated for
density. If required, the current programmed density can be
changed (See Chapter 5, "Changing Default Settings", for changing
density setting).
When the input film supply is exhausted, the LCD will display "OUT
OF MEDIA". If the film has jammed, the LCD will display "JAM".
3000/4000 UM : Chapter 3 (Controls) Page 12 Wednesday, September 4, 1996 8:28 AM
