Ultre 3000/4000 - User Manual
6-5
Messages - 6
■
Error Messages and Corrective Procedures
The are a number of situations where the machine will halt normal
operation and display error messages on the LCD. The following
describes the possible causes and corrective action to be taken for
each error before normal operation can resume.
■
JAM
Possible Cause
The photo material has jammed in the machine.
Corrective Action
Clear the jammed photo material by opening the front cover,
releasing pressure roller lever and pulling out the jammed
material. If it is difficult to clear the JAM you may invoke the
REVERSE FEED function described in "Reverse Feed" on page 5-
11. In some cases it may be advantageous to first cut the material
by briefly pushing the JOG Button to clear the fault condition and
pushing the CUT Button.
3000/4000 UM : Chapter 6 (Messages) Page 5 Wednesday, September 4, 1996 8:28 AM
