Ultrasonix SonixTablet, Service Manual

Page: 80 / 123

Chapter 9: Network Configuration 00.053.129, Revision C SonixTablet Service Manual
9-4
9.1.2 Dialup Network Configuration (If Available)
Figure 9-3: Network Configuration Page (Dialup)
To Configure a Dial-up Connection (If Available):
1. Connect the modem's USB connector to the System Case Connectivity Panel (refer to 7.1.7 Connectivity for
available connection ports).
2.
Connect the other end of the modem to a telephone jack in the wall.
3.
Tap the touch screen button.
4. Select Administrator > Network > Dialup Internet Connection .
5.
Under Online Support , ensure the Chat Support Enabled checkbox has been selected.
6.
Complete the Account Information and Options sections: Phone Number , Username , Password and
Timeout .
7.
Select OK and exit the Menu system.
9.1.2.1 Dialup Communication Test
To Perform a Dialup Communication Test:
1.
Tap the touch screen button.
2.
Select Online Support . This should connect the system to an Ultrasonix Technical Support Representative.
Note: A dialup connection requires a third-party, USB modem. Contact your dealer or Ultrasonix Technical Support
to learn more about this option.
Note: Do not select the Chat Support Enabled checkbox unless there is an Internet connection available.
Note: While the system is dialing out, the current dialing status to the ISP will be displayed.
Note: It may be necessary to restart in order for the changes to take affect.