Ultrasonix SonixTablet Service Manual Download Page 37

Page: 37 / 123

SonixTablet Service Manual

00.053.129, Revision C

Chapter 5: Software

5-3

5.2

PATIENT DATABASE REPAIR

This option is to be used only if the patient database becomes corrupted.

To Repair the Patient Database:

Tap the touch screen

button.

Select

Administrator > Patient > Repair Database

Select

to exit.

5.3

SYSTEM RECOVERY

Before performing a system recovery, consult an Ultrasonix Technical Support Representative as this should only be done as
a last resort. Technical Support will provide you with the appropriate documentation to carry out a system recovery.

Caution:

Backup patient data on a regular basis (

7.1 Protecting Patient Data

Caution:

System Recovery can erase all Patient/Exam data on the hard drive!

Summary of Contents for SonixTablet




























































































































Search results

Summary of Contents for SonixTablet

Reviews:

Related manuals for SonixTablet

Brands by name

Popular brands

Ultrasonix SonixTablet, Service Manual

Search results

Summary of Contents for SonixTablet

Reviews:

Related manuals for SonixTablet

Brands by name

Popular brands