Ultrasonix SonixTablet, Service Manual

Page: 23 / 123

SonixTablet Service Manual 00.053.129, Revision C Chapter 3: System Installation
3-7
9.
Remove the system from the plastic bag.
10.
Set the system upright on the table surface.
To Unpack Transducers:
1.
Ensure the top of the transducer box is facing in the correct direction and slice through the tape sealing it.
2.
Remove the transducer case(s).
Warning: Do not place the device on any surface that blocks/restricts ventilation (e.g., do not set the device
on a soft surface such as a bed). Failure to comply with this directive could inhibit system airflow and
cause the system to overheat - which is not covered by the system warranty.
Note: The transducer packing carton will vary in size, depending on whether it contains, one (1), two (2) or
three (3) transducers.
One (1) Transducer
Two (2) or Three (3)
Transducers