Ultraflux Uf 841, User Manual

Page: 91 / 105

91
NT UF 841 CP GB (d) / June 2015
Pipe fault
BIT No. FUNCTION NAME DESCRIPTION
0 Velocity1 Chord 1 velocity faulty.
1 Velocity2 Chord 2 velocity faulty.
2 Velocity3 Chord 3 velocity faulty.
3 Velocity4 Chord 4 velocity faulty.
4 Velocity5 Chord 5 velocity faulty.
5 Velocity6 Chord 6 velocity faulty.
6 Velocity7 Chord 7 velocity faulty.
7 Velocity8 Chord 8 velocity faulty.
16 General velocity All velocities are faulty.
17 General level All levels are faulty.
18 Height velocity The height velocity law or the automatic regression is activated.
30 Fault Fault on a velocity.
31 Not valid Velocity not valid.
Input/output modules fault
BIT No. FUNCTION NAME DESCRIPTION
0
On relay A output
metering
Relay A cannot output the number of pulses required based on
the programmed period.
1
Relay A output outside
range
Relay A cannot output the required frequency based on the
programmed range.
2
On relay B output
metering
Relay B cannot output the number of pulses required based on
the programmed period.
3
Relay B output outside
range
Relay B cannot output the required frequency based on the
programmed range.
4
Current A output loop
open
Current loop open.
5
Current A output value
outside range
The value of current A is outside the authorized range.
8
Value outside range
input PT100/1000
The temperature measurement of PT100 A is outside the
authorized range.
12
Current A input value
outside range
The measurement of current A is outside the authorized range.
14
Current B input value
outside range
The measurement of current B is outside the authorized range.
16
Voltage A input value
outside range
The measurement of voltage A is outside the authorized range.
18
Voltage B input value
outside range
The measurement of voltage B is outside the authorized range.