Ultraflux Uf 841, User Manual

Page: 69 / 105

69
NT UF 841 CP GB (d) / June 2015
7.1 Introduction
The PC software is used to configure the flow meter using a PC, rather than accessing the parameters using
the keypad of the flow meter.
It is used in particular:
•
to define all settings for the application,
•
to monitor, in real time, the measurement parameters (flow, average velocity, speed of sound and
gain for each chord, etc.),
•
to save the measurement or settings data in a file for later consultation,
•
to download, using the serial link or USB, the flow meter operation settings, the measurement data,
the logger,
•
to print the displayed data,
•
to transfer the measurement and logger data to a spreadsheet program.
The minimum PC configuration required is a PC with a Windows version later than Windows XP.
7.1.1 Installing and running the software
To install the software:
1. Run the Setup.exe installation program included on the CD-ROM,
2. Select the language to use for the installation and for displaying the screens,
3. Using the Browse button, specify the software installation path (by default C: \ Program Files \
Ultraflux \ [PC software corresponding to your flow meter].x, with x designating the version no.).
Comment: For an identical reinstallation of the program (for example in the event of damage to the
execution file) or to uninstall it, select the program from the list of installed programs (Start / Settings /
Configuration panel / Add/Remove programs) and click the Add/Remove button.
A window asks you which action you wish to carry out: Change (function not available for the software,
since it only contains a single component), Repair or Remove.
The program is run by double-clicking the icon associated with the software and placed on
the desktop, or by selecting the program via Start \ Programs \ Ultraflux \ software corresponding to your
flow meter.