Ultraflux Uf 841, User Manual

Page: 76 / 105

76
NT UF 841 CP GB (d) / June 2015
•
In the "Control" drop-down menu
o
"Control" tab: flow unit, time constants, flow graph settings, display options, etc.
o
"Chord" tab: definition of the probes, positions of the chords, etc.
o
"Advanced chord" tab: definition of specific codes used to fine-tune the behaviour of the
flow meter (contact Ultraflux before modifying these settings).
o
"Linearisation" tab: flow rate linearisation coefficient.
Once the settings are completed, upload the configuration to the flow meter by clicking this button.
Comment: On opening the settings window, the configuration loaded in the PC is the current configuration
of the flow meter.
2) "General" tab (in the "General" drop-down menu)
The settings window is used to configure the flow meter from the PC. As with the keypad, you can choose
the level of complexity using the command: General/Application Selection/Level = Simple, Normal or
Advanced.
The screenshot below shows an example of an Advanced mode configuration. All settings displayed below
have been described previously in this document.
The software allows the date and time of the Uf 841 to be synchronized with those of the host PC: select the
option "Synchronise with PC time" before saving the settings on the flow meter.
It is important to correctly set the date and time in order to time stamp the records (country, summer/winter
time).